Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterTrusted Mold Remediation for Jersey City Homeowners
Mold remediation in Jersey City typically costs between $1,500 and $6,000 depending on how far the growth has spread, what’s feeding it, and whether it’s behind walls or under flooring. Most jobs in the area take three to five days once we get started, and we can usually have a crew at your door within hours of your call. If you’re standing in a Jersey City basement right now staring at black fuzz on the drywall, call Wade Ferris at (201) 903-9581. He will pick up.
We’re not a national chain with a call center in another state. Wade’s Restoration has been owner-operated since 2007, and Wade’s name is on the truck. He lives here, works here, and runs into his customers at the grocery store. That’s the accountability that matters when someone is ripping out moldy drywall in the house where your grandkids sleep. Our guys hold IICRC and RIA credentials, and they use equipment from Dri-Eaz that actually pulls moisture out instead of just masking the smell.
What Our Mold Remediation Service Includes
Mold is never just mold. It’s a moisture problem that found a surface. If you only kill the visible growth and leave the water, it comes back. So every job starts with finding the water, then the mold, then the air. Here’s what that looks like, broken down by the work we actually do in Jersey City homes.
Mold Inspection & Testing
You don’t always see mold. Sometimes you smell it, damp and sour, in a room that hasn’t had a leak you’ve noticed. We walk the whole house, not just the spot you called about. Moisture readings get taken in every room we inspect, including inside walls using non-invasive meters, and if the situation calls for it, we take air and surface samples to confirm what kind of mold we’re dealing with before we start removing anything.
In Jersey City especially, the old housing stock means mold hides in places newer construction doesn’t have: behind plaster, inside chimney chases, under layers of old flooring. We know where to look because we’ve been looking in these same neighborhoods for nearly two decades. If your home has a shared wall with a neighbor, we’ll check it, because in attached housing, the moisture problem might be coming from next door.
Mold Removal
Mold removal is the physical work: cutting out contaminated drywall, disposing of affected insulation, treating framing, and cleaning what can be saved. We contain the work area with negative air pressure so spores don’t drift into the rest of your house while we’re working. Wade’s crew suits up in full PPE because the people doing the work deserve protection too.
After the visible mold is gone, the job’s still not done. The air inside the containment needs to be scrubbed with HEPA filtration, and the framing needs to dry to a level where mold can’t regrow. We document everything with photos and moisture readings, and you get the log at the end. Not because you asked for it, but because you should know what was done behind your own walls.
Black Mold Remediation
Black mold, or Stachybotrys chartarum to be precise, gets all the attention, and for good reason. Long-term exposure isn’t something to gamble with, especially for kids, older adults, or anyone with a compromised immune system. The visual black staining usually means the mold has been growing for a while, feeding on material that’s been wet for weeks or longer.
We treat black mold with the same process as any other mold: contain it, remove it, dry it, and verify the air is clean afterward. The difference is we’re more conservative about what gets thrown out versus what gets cleaned. When in doubt with black mold on porous surfaces, it goes. That’s the call Wade makes on site, and he’ll show you why.
Air Quality Restoration
After mold is removed, the air inside your home can still carry spores and the musty smell that tells your nose something was wrong. We run HEPA air scrubbers to pull particles down to a size your lungs would otherwise process. We also check humidity levels and ventilation, because stale, damp air is how the next mold problem starts.
Once we’re done, we do clearance testing to make sure the spore counts inside the home match what’s normal outside. You should be able to walk into the room, breathe deep, and not smell a thing. If you still smell mildew, we’re not done. It’s that simple.
Crawl Space Treatment
A lot of Jersey City homes have crawl spaces instead of full basements, and they’re the most ignored part of the house. Dirt floors, open vents, and a lack of drying means the wood down there stays damp, and mold grows on floor joists you never see. It’s the kind of problem that gets discovered during a home inspection, and suddenly the sale is on hold.
We get under there, treat the mold, and then deal with the reason it happened. Usually that means vapor barrier, better drainage, or sealing vents. Wade’s been under more Jersey City crawl spaces than he cares to count, and he’ll tell you straight: if a company quotes you mold removal without mentioning the moisture source, get another company.
Moisture & Humidity Control
Jersey City summers are humid, and old brick row houses hold that moisture. You run the AC, and still, the basement feels sticky. That’s when you start to see the signs: peeling paint at the baseboard, warped floors, that early-morning smell when you open a closet door. The mold might not even be visible yet, but the conditions are primed.
We set up dehumidification systems sized for the actual square footage and the actual moisture load, not just whatever unit fits in the corner. Then we monitor it. Wade takes daily moisture readings during the drying process and hands you the complete log when the job is done. Almost nobody in this trade does that, and he’s been doing it since the first year he opened.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Mold Remediation
Not every Jersey City mold job starts with a flood. A lot of them start with a dehumidifier that failed, a sump pump that quit, or an air handler that’s been leaking condensation into the plenum for a year.
We’ve been called to homes from all over Hudson County with all kinds of equipment in them. We’re not tied to any one brand, so we’ll tell you honestly if the unit you have is worth saving or if the money’s better spent on a replacement. Our job is the mold and the moisture, not selling you a new appliance.
Whether you’ve got a Dri-Eaz unit that’s been running strong for years or something else entirely, the process is the same. We find the water, fix the water, remove the mold, and dry the structure. If you’re not sure where the moisture’s coming from, call us. We’ll figure it out before we quote you anything.
Signs You Need Mold Remediation Right Now
You don’t need a full inspection to know something’s wrong. Your nose knows, and your eyes will catch the rest if you look. Here’s what to look for in a Jersey City home.
- Musty or earthy smell that won’t go away. Mold releases gasses as it grows, and the smell is the first signal. If you’re dumping baking soda in the carpet every week and the basement still smells like wet dirt, there’s moisture trapped somewhere you can’t see.
- Visible black, green, or white spots on walls or ceilings. Mold can be fuzzy, powdery, or just look like a stain. If the spot grows back after cleaning, that’s mold, not dirt. Cleaning it off the surface without fixing the moisture is a temporary fix at best.
- Peeling paint or bubbling wallpaper. Paint blisters when moisture pushes from behind it. In a Jersey City brownstone, that could mean a roof leak, a chimney flashing failure, or condensation inside the wall cavity. All of them create the conditions mold loves.
- Unexplained allergy symptoms that improve when you leave home. Sneezing, itchy eyes, coughing, or waking up congested every morning while you feel fine at work. Mold in the bedroom or the living room vent is a common culprit. It’s not debated; it’s a known irritant.
- Water stains or a past leak that was never properly dried. A pipe burst two winters ago, you mopped it up, it seemed fine. It wasn’t. The water got under the baseboard, into the drywall, and the mold has been growing in the dark since. Even old leaks matter.
If you’ve checked off two or more of these, you need someone to open a wall and find out what’s happening. That’s what we do. And if it turns out to be nothing, which happens, Wade will tell you that too. He doesn’t invent work.
Our Mold Remediation Process - Step by Step
Here’s how a mold remediation job with Wade’s Restoration actually goes, from your first call to the day you get your clearance paperwork.
- 1
Inspection and moisture mapping. Wade walks the property with you, takes moisture readings in every room, and finds the water source. He’ll check the roof, the gutters, the plumbing, the grading outside. If the moisture is coming from somewhere that’s not our scope, like a failed water heater that needs replacing, he’ll tell you that before anything else. Then he’ll give you a written scope of work and an honest price.
- 2
Containment and air control. Before we open a single wall, the work area gets sealed off with plastic sheeting and negative air pressure. HEPA air scrubbers run continuously. The goal is to keep every mold spore we disturb from ending up in your living room, your kitchen, or your kids’ bedrooms.
- 3
Removal and demolition. Contaminated drywall, insulation, carpet, and underlayment come out in sealed bags. Salvageable framing gets wire-brushed and treated with an antimicrobial. This is the loud, messy phase, and we’re done with it as fast as the job allows, without cutting corners.
- 4
Drying and dehumidification. Professional-grade Dri-Eaz dehumidifiers and air movers run until the moisture content in the framing reads normal. Wade checks those readings every single day and keeps a log. You get a copy of that log at the end. Almost nobody else does this, and it’s the difference between mold that stays gone and mold that comes back in six months.
- 5
Clearance testing and final walkthrough. Air samples get taken and compared to outdoor levels. When the numbers are right, we remove the containment, clean the area, and walk through it with you. If you’re not satisfied, we address it. The 90-Day Done Right Promise is in writing on every mold job we do. If it’s not done right, Wade comes back.
How Much Does Mold Remediation Cost in Jersey City?
What affects the price is straightforward. How much surface area is affected. Whether the mold is in drywall only or has gotten into the framing. Whether we need to remove flooring or cabinetry. How long the drying takes. Whether a structural issue is causing the moisture, like a failed foundation drain or a roof that needs attention. That last one is not our scope, but we’ll flag it so you know the full picture before you spend money on remediation.
How do you avoid overpaying? Get a written scope of work, not a verbal number. A legitimate company tells you exactly what’s coming out, what’s getting treated, and what’s getting dried. Beware of anyone who gives you a price over the phone without seeing the job. Also beware of the opposite: a company that sends a salesman with a moisture meter who finds “toxic mold” everywhere and starts talking about emergency pricing. That’s a known problem in this industry, and it’s why Wade hands you a written estimate and it’s good for thirty days. No pressure, no games. We also offer a free second opinion on any written estimate you’ve gotten from someone else. Bring it in, and Wade will go through it line by line with you. No charge for that.
Mold Remediation Near Jersey City - Our Service Area
We handle mold remediation in Jersey City from Bergen-Lafayette to the Heights to Greenville, and we head out into the surrounding towns just as often. Hoboken, Harrison, Kearny, Union City, Weehawken, and Secaucus are all within our regular service area. For most mold jobs in Jersey City, we can be on site the same day you call. From the Financial District across the river to Lower Manhattan, Wade’s crew has been crossing the Hudson to handle mold work for years. If you’re not sure we cover your street, call and ask. If you’re in our own county, there’s no trip charge. That’s the rule.
Serving Jersey City, NJ - Our Local Coverage Area
We’re based in the Jersey City area and offer Jersey City Mold Remediation, so we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Mold Remediation in Jersey City
What is mold remediation?
Mold remediation is the process of finding the water source, removing contaminated materials, treating what can be saved, drying the structure, and verifying the air is clean afterward. It’s more than wiping down a wall with bleach. The goal is to return the home to a normal fungal ecology, which means the mold growth is gone and the moisture is under control.
How long does mold remediation take?
Most Jersey City mold jobs take three to five days from containment to clearance testing. Small jobs can be done in a day or two. Jobs with extensive structural damage or crawl space work can run a week or more. The drying phase is what takes time, and rushing it is how mold comes back.
How much does mold remediation cost in Jersey City?
Expect to pay between $800 and $6,500 for most residential mold work in Jersey City, with the average falling around $2,500 to $3,500. Small isolated jobs are on the lower end. Full basement remediations with substantial demolition and drying are on the higher end. Every job is different, which is why we give you a written estimate after the inspection, not before.
Do you handle black mold specifically?
Yes, black mold is one of the more common things we deal with in Jersey City basements and crawl spaces. The process is the same as any mold remediation: contain, remove, dry, and verify. The stakes are higher with black mold because of the potential health effects, so we’re more conservative about what gets thrown out versus cleaned.
If I call about mold, how fast can someone get here?
For active water with mold, we aim to be on site within hours. Wade answers his own phone, day or night, so you won’t wait on hold through a call center. If it’s not an active water event, we’ll schedule the inspection as soon as possible, usually next day. Mold isn’t going to double overnight, but a running leak will keep feeding it, so if water is still coming in, call now.
Do you warranty your mold remediation work?
Yes. Every mold remediation job from Wade’s Restoration carries a 90-Day Done Right Promise in writing. If the mold comes back or the problem wasn’t handled correctly, Wade comes back and makes it right. That’s not a marketing line. It’s stamped on the contract.
How do I prepare my home for mold remediation?
Clear the area as much as you can. Move furniture, boxes, and personal items out of the affected room if possible. We’ll seal off the work area so you can stay in the home in most cases, but if the contamination is extensive, you may want to stay elsewhere for a few days. We’ll walk you through it after the inspection, and we’ll tell you exactly what we need from you before we start.
Schedule Your Mold Remediation Service in Jersey City Today
If you’ve found mold or you think you might have, call Wade Ferris at (201) 903-9581. You’ll get him, or someone on his team, and you’ll get answers, not a sales pitch. Every mold job starts with an inspection, and every inspection comes with a written estimate and no obligation. We offer a free second opinion on any written estimate, no trip charge in our county, and a permanent 10% discount for seniors and veterans. If your basement is wet right now and the mold has been growing for weeks, don’t wait. Call (201) 903-9581 and get a real person on the line. To wade is what you do through a flooded basement at two in the morning, and it happens to be his name.
Written by Wade Ferris, Owner at Wade’s Restoration, serving Jersey City since 2007. Home